No. P6972
P. 21/ 64
8. EXTERNAL CONNECTION
WARNING
Observe the following to prevent electrical shock.
When touching live electrical parts, critical electric shock and burn may occur.
Do not touch live electrical parts inside or outside of the welding machine.
When grounding to the case of the welding power source, base metal and jigs connected
electrically to the base metal should be performed by persons qualified in electrical work
and according to the laws and regulations in your area.
Be sure to turn off the line disconnect switch before connecting.
Do not use cables with insufficient capacity, damaged or exposed conductors.
Securely tighten each connection.
Securely attach the case and cover after connecting cables.
8.1
External connection of output side
In case of using air cooled torch
