－
16
－
8. CONNECTION PROCEDURE AND GROUND FOR SAFETY USE
(Continued)
8.2.1
For MAG/MIG welding use
Connect in the numerical order.
(1) Ground the base metal. (If required by the local law or codes)
(2) Connect
the
welding cable between the base metal and output terminal (base metal
⊝
) of the
power source.
(3) Connect control cable, power cable, gas hose and water feed / condensate hoses to the wire
feeder.
（
4
）
Connect the other end of the cables and hoses to the back side of the welding power source.
(5) Connect the gas tube of the wire feeder to the gas outlet on the gas regulator.
(6) Connect the welding torch to the wire feeder.
