Dahua N41C1P, User Manual, Page: 358 / 377

User's Manual
342
Questions Reasons
NVR cannot control PTZ.
●
Front panel PTZ error.
●
PTZ decoder setup, connection or installation is not
correct.
●
Cable connection is not correct.
●
PTZ setup is not correct.
●
PTZ decoder and NVR protocol is not compatible.
●
PTZ decoder and NVR address is not compatible.
●
When there are several decoders, add 120 Ohm
between the PTZ decoder A/B cables furthest end to
delete the reverberation or impedance matching.
Otherwise the PTZ control is not stable.
●
The distance is too far.
I cannot log in client-end or
web.
●
For Windows 98 or Windows ME user, update your
system to Windows 2000 sp4. Or you can install
client-end software of lower version. Please note right
now, our NVR is not compatible with Windows VISTA
control.
●
ActiveX control has been disabled.
●
No dx8.1 or higher. Upgrade display card driver.
●
Network connection error.
●
Network setup error.
●
Password or username is invalid.
●
Client-end is not compatible with NVR program.
There is only mosaic no
video when preview or
playback video file remotely.
●
Network fluency is not good.
●
Client-end resources are limit.
●
Current user has no right to monitor.
Network connection is not
stable.
●
Network is not stable.
●
IP address conflict.
●
MAC address conflict.
●
PC or device network card is not good.
Burn error /USB back error.
●
Burner and NVR are in the same data cable.
●
System uses too much CPU resources. Stop record
first and then begin backup.
●
Data amount exceeds backup device capacity. It might
result in burner error.
●
Backup device is not compatible.
●
Backup device is damaged.