Dahua N41C1P, User Manual, Page: 257 / 377

User's Manual
241
Figure 5-199 Alarm center
Step 2 Click to enable the function.
Step 3 Configure the parameters.
Table 5-62 Alarm center parameters
Parameter Description
Protocol Type Select a protocol type.
Server Address
The IP address and communication port of the PC installed with
alarm client.
Port
Auto Report Plan Select time cycle and specific time for uploading alarm.
Step 4 Click Apply.
5.11.16 Register
You can register the Device into the specified proxy server which acts as the transit to enable
the client software to access the Device
Prerequisites
●
The proxy server has been deployed.
●
The Device, the proxy server and the device running the client software are on the same
network.
Procedure
Step 1 Select Main Menu > NETWORK > Register.