Dahua N41C1P, User Manual, Page: 100 / 377

User's Manual
84
We recommend this method when you want to add only a few remote devices and know
their IP addresses, usernames and passwords.
Procedure
Step 1 Select Main Menu > CAMERA > Camera List > Camera List.
Step 2 (Optional) Enable H.265 Auto Switch.
When H.265 Auto Switch is enabled, the video compression standard of added
remote devices is switched to H.265 automatically.
Step 3 Click Manual Add.
Figure 5-56 Manual add
Step 4 Configure the parameters.
The parameters might vary depending on the manufacturer that you select.
Table 5-15 Remote channel parameters
Parameter Description
Channel
Select the channel that you want use on the Device to
connect the remote device.
Manufacturer Select the manufacturer of the remote device.
IP Address Enter the IP address of the remote device.