Dahua N41C1P, User Manual, Page: 247 / 377

User's Manual
231
5.11.9 PPPoE
PPPoE is another way for the Device to access the network. You can establish network
connection by configuring PPPoE settings to give the Device a dynamic IP address on the
WAN.
Prerequisites
To use this function, firstly you need to obtain the username and password from the Internet
Service Provider.
Procedure
Step 1 Select Main Menu > NETWORK > PPPoE.
Figure 5-193 PPPoE
Step 2 Enable the PPPoE function.
Step 3 Enter the username and password provided by the Internet Service Provider.
Step 4 Click Apply.
The IP address appears on the PPPoE page. You can use this IP address to access the
Device.