Dahua HCVR8204A-S3, User Manual

Page: 88 / 446

78
Figure 4-38
4.1.4.5.2 Snapshot
It is set snapshot mode for each channel, and picture size, quality and frequency.
Step 1 Click Snapshot tab, enter the following interface. See Figure 4-39.
Step 2 Set parameters.

Manual snap: The manual snapshot amount. The value ranges from 1 to 5.

Snapshot mode: There are two modes: timing and trigger. If you set timing mode, you
need to set snapshot frequency. If you set trigger snapshot, you need to set snapshot
activation operation.

Image size: Here you can set snapshot picture size.

Image quality: Here you can set snapshot quality. The value ranges from 1 to 6.

Interval: It is for you to set timing (schedule) snapshot interval.