Dahua HCVR8204A-S3 User Manual Download

Page: 222 / 446

212

4.14.10

Alarm Output

It is to set alarm output mode. There are three modes: Auto/manual/stop.

Step 1 From Main menu->Setting->Event->Alarm output.

Enter alarm output interface. See Figure 4-190.

Step 2 Set parameters.



Auto: The corresponding event triggers the alarm output or cancels alarm.



Manual: Forcedly trigger alarm output.



Stop: Forcedly cancel or close alarm output.



Status: Here you can view alarm output port status. The alarm is enabled if the icon is

highlighted.



Alarm release: Click the OK button, you can clear all alarm output status.

Step 3 Click Apply or Save to complete setup.

Figure 4-190

4.15

Storage

It is to manage HDD storage space, detect HDD working status and etc.

4.15.1 HDD Manager

It is to view and sett HDD properties and format HDD.

From main menu->Setting->Storage->HDD manager. Enter HDD manager interface. See

Figure 4-191.

It is to view current HDD type, status, capacity and etc. The operation includes format

HDD, and change HDD property (read and write/read-only/redundancy).

Summary of Contents for HCVR8204A-S3































































































































































































































































































































































































































































Search results

Summary of Contents for HCVR8204A-S3

Reviews:

Related manuals for HCVR8204A-S3

Brands by name

Popular brands

Dahua HCVR8204A-S3, User Manual

Search results

Summary of Contents for HCVR8204A-S3

Reviews:

Related manuals for HCVR8204A-S3

Brands by name

Popular brands