Dahua HCVR8204A-S3 User Manual Download

Page: 251 / 446

241

4.18.3 Default

Note

The default function is for admin user only.

It is to restore system to the factory default user. (Select item(s) on the interface to restore

specified data.)

From main menu->Setting->System->Default. Enter Default interface. See Figure 4-222.

Figure 4-222



Select an item on the interface and click Save/Apply button, it is to restore the

specified item(s) to the default setup.



Click factory default button, it is restore all items to factory default setup.

4.18.4 System Upgrade

Please upgrade system regularly to guarantee system stability.

From main menu->Setting->System->Upgrade you can see the following interface. Se

Figure 4-223.



Start: Please insert the USB device that containing the update file to the device and

then click the Start button to begin the update.

Summary of Contents for HCVR8204A-S3































































































































































































































































































































































































































































Search results

Summary of Contents for HCVR8204A-S3

Reviews:

Related manuals for HCVR8204A-S3

Brands by name

Popular brands

Dahua HCVR8204A-S3, User Manual

Search results

Summary of Contents for HCVR8204A-S3

Reviews:

Related manuals for HCVR8204A-S3

Brands by name

Popular brands