Dahua DH-XVR4104C-X User Manual Download

Page: 90 / 327

Local Configurations

You can adjust the border margins in top, bottom, left and right directions as well as the

brightness of the monitor connected to the Video out port of the Device.

Select

Main Menu > DISPLAY > TV ADJUST

Step 1

The

TV ADJUST

interface is displayed. See Figure 5-44.

Figure 5-44

Configure the parameters according to your actual situation.

Step 2

Click

Apply

to complete the settings.

Step 3

5.2.7 Configuring Tour Settings

You can configure a tour of selected channels to repeat playing videos. The videos display in

turn according to the channel group configured in tour settings. The system is playing one

channel group for a certain period and then automatically changes to the next channel group.

Select

Main Menu > DISPLAY > TOUR

Step 1

The

TOUR

interface is displayed. There are Main Screen tab and Extra Screen tab,

see Figure 5-45 and Figure 5-46.

Summary of Contents for DH-XVR4104C-X








































































































































































































































































































































Search results

Summary of Contents for DH-XVR4104C-X

Reviews:

Related manuals for DH-XVR4104C-X

Brands by name

Popular brands

Dahua DH-XVR4104C-X, User Manual

Search results

Summary of Contents for DH-XVR4104C-X

Reviews:

Related manuals for DH-XVR4104C-X

Brands by name

Popular brands