Dahua DH-XVR4104C-X User Manual Download

Page: 58 / 327

Local Configurations

5.1.3.3 Using Reset Button on the Mainboard

You can always use the reset button on the mainboard to reset the Device to the factory default.

Not all models are provided with reset button.

Disconnect the Device from power source, and then remove the cover panel. For

Step 1

details about removing the cover panel, see "2.2 Installing HDD."

Find the reset button on the mainboard, and then press and hold the reset button for 5

Step 2

seconds to 10 seconds. See Figure 5-14 for the location of the reset button.

Reset button

Figure 5-14

Reboot the Device.

Step 3

After the Device is rebooted, the settings have been restored to the factory default. You

can start resetting the password.

5.1.4 Setting Up with the Startup Wizard

5.1.4.1 Entering Startup Wizard

The Startup Wizard helps you configure the basic settings to set up the Device.

After you have initialized the Device, the

Startup Wizard

interface is displayed. See Figure

5-15.

Summary of Contents for DH-XVR4104C-X








































































































































































































































































































































Search results

Summary of Contents for DH-XVR4104C-X

Reviews:

Related manuals for DH-XVR4104C-X

Brands by name

Popular brands

Dahua DH-XVR4104C-X, User Manual

Search results

Summary of Contents for DH-XVR4104C-X

Reviews:

Related manuals for DH-XVR4104C-X

Brands by name

Popular brands