Dahua DH-XVR4104C-X User Manual Download

Page: 19 / 327

Getting Started

device and fix the screws.

2.2.4 DH-XVR4216AN-X/DH-XVR4232AN-X/DH-XVR5216AN-X/D

H-XVR5232AN-X/DH-XVR5208AN-4KL-X/DH-XVR5216AN-4KL-X/

DH-XVR5216A-X/DH-XVR7208A-4KL-X/DH-XVR7216A-4KL-X/DH-

XVR7208A-4K-X

1. Remove the screws on the

cover.

2. Fix the screws onto the

HDD, but do not be

fastened.

3. Put the HDD into the

Device.

4. Turn the device to see the

back side of it. Aim the

screws of the HDD at the

holes on the back of the

device, and then fix the

screws.

5. Use the HDD cable and

power cable to connect

HDD and mainboard.

6. Put back the cover and fix

the screws.

2.2.5 DH-XVR7416L-4KL-X/DH-XVR5432L-X

1. Remove the screws on

cover.

2. Use the screws to fix the

HDD onto the bracket.

3. Connect one end of HDD

cable to the HDD.

Summary of Contents for DH-XVR4104C-X








































































































































































































































































































































Search results

Summary of Contents for DH-XVR4104C-X

Reviews:

Related manuals for DH-XVR4104C-X

Brands by name

Popular brands

Dahua DH-XVR4104C-X, User Manual

Search results

Summary of Contents for DH-XVR4104C-X

Reviews:

Related manuals for DH-XVR4104C-X

Brands by name

Popular brands