Dahua DH-XVR4104C-X User Manual Download

Page: 18 / 327

Getting Started

7. Use the HDD cable and

power cable to connect

HDD and mainboard.

8. Install the bracket back and

then fasten the screws.

9. Put back the cover and

fasten the screws.

2.2.3 DH-XVR4116HS-X/DH-XVR5108HS-X/DH-XVR5116HS-X/DH

-XVR5104HS-4KL-X/DH-XVR5108HS-4KL-X/

DH-XVR5108H-X/DH-XVR5116H-X/DH-XVR5104H-4KL-X/DH-XVR

5108H-4KL-X/DH-XVR5116H-4KL-X/DH-XVR5108HE-X/DH-XVR51

16HE-X/DH-XVR7104HE-4KL-X/DH-XVR7108HE-4KL-X/DH-XVR7

116HE-4KL-X/DH-XVR7108HE-4K-X/DH-XVR5104HS-X/

DH-XVR4104HS-X/DH-XVR5104H-X/DH-XVR5104HE-X/DH-XVR4

108HS-X

1. Remove the screws on the

rear panel.

2. Fix the screws on the HDD

but do not be fastened.

3. Place the HDD onto the

Device.

4. Turn the device to see the

back side of it. Aim the

screws of the HDD at the

holes on the back of the

5. Use the HDD cable and

power cable to connect

HDD and mainboard.

6. Put back the cover and

fix the screws.

Summary of Contents for DH-XVR4104C-X








































































































































































































































































































































Search results

Summary of Contents for DH-XVR4104C-X

Reviews:

Related manuals for DH-XVR4104C-X

Brands by name

Popular brands

Dahua DH-XVR4104C-X, User Manual

Search results

Summary of Contents for DH-XVR4104C-X

Reviews:

Related manuals for DH-XVR4104C-X

Brands by name

Popular brands