44
Modify alarm linkage parameter
Table 4-1
Alarm linkage parameter description
Parameter
Description
Alarm Input
You cannot edit the value. Keep it default.
Name
Enter a zone name.
Alarm Input Type
There are two options: NO and NC.
If alarm input type of the alarm device you purchased is NO, then you should
select NO; otherwise you should select NC.
Fire Link Enable
If fire link is enabled the access controller will output alarms when fire alarms
are triggered. The alarm details will be displayed in the alarm log.
Alarm output and access link are NO by default if fire link is enabled.
Alarm Output
Enable
The relay can output alarm information (will be sent to the management
platform) if the
Alarm Output
is enabled.
Duration (Sec.)
The alarm duration, and the range is 1–300 seconds.
Alarm Output
Channel
You can select an alarm output channel according to the alarming device
that you have installed. Each alarm device can be regarded as a channel.
Access Link Enable
After the Access Link is enabled, the access controller will be normally on or
normally closed when there are input alarm signals.
Channel Type
There are two options: NO and NC.
Click
OK
, and then the configuration is completed.
The configuration on the web will be synchronized with the configuration in the client if the access
controller is added to a client.
