27
3.7.3
Wiegand Configuration
Select
Weigand Input
or
Weigand Output
according to the entering direction and exiting direction.
Select
Connection > Weigand
.
Weigand
Select
Weigand Input
when an external card swipe mechanism is connected to the access
controller.
Select
Weigand Output
when the access controller works as a reader that can be connected to
the controller.
Table 3-7
Weigand output
Parameter
Description
Weigand Output Type
The
Weigand Output Type
determines the card number or the digit of
the number that can be recognized by the access controller.
Weigand26, three bytes, six digits.
Weigand34, four bytes, eight digits.
Weigand66, eight bytes, sixteen digits.
Pulse Width
You can set pulse width and pulse interval.
Pulse Interval
Output Data Type
You can select the types of output data.
User ID: If User ID is selected, and then user ID will be output.
Card No.: If Card No. is selected, and then card number will be
output.
System
3.8.1
Time
You can set up date format, date, time, DST, NTP check, and time zone.
When you select
Network Time Protocol
(NTP), you need to enable the
NTP Check
function first.
Server IP Address: enter the IP address of the time server, time of the access controller will be
synchronized with the time server.
Port: Enter the port number of the time server.
Interval (min): NPT check interval. Tap the save icon to save.
