63
TCP/IP
Configure parameters.
Table 4-11
TCP/IP
Parameter
Description
IP Version
There is one option: IPv4.
Ethernet Card
Select to configure parameters of the card.
MAC Address
MAC address of the access controller.
Mode
Static
Set IP address, subnet mask, and gateway address manually.
DHCP
After DHCP is enabled, IP address, subnet mask, and gateway address
cannot be configured.
If DHCP is effective, IP address, subnet mask, and gateway address will be
displayed automatically; if DHCP is not effective, IP address, subnet mask,
and gateway address will all be zero.
If you want to see the default IP when DHCP is effective, you need to
disable DHCP.
Link-local address
Link-local address is only available when IPv6 is selected in the IP version.
Unique link-local addresses will be assigned to network interface controller in
each local area network to enable communications. The link-local address
cannot be modified.
Subnet Mask
Enter IP address, and then configure subnet mask and gateway address.
IP address and gateway address must be in the same network segment.
Default Gateway
Preferred DNS
Server
Set IP address of the preferred DNS server.
Alternate DNS
Server
Set IP address of the alternate DNS server.
Click
OK
to complete the setting.
