Dahua Technology XVR5232AN-I3 Page 65 User Manual Download

Page: 65 / 396

User’s Manual

The reset button is available on select models.

Disconnect the Device from power source, and then remove the cover panel. For details about
removing the cover panel, see "2.2 Installing HDD".

Find the reset button on the mainboard, and then press and hold the reset button for 5
seconds to 10 seconds.

Reset button

Reboot the Device.
After the Device is rebooted, the settings have been restored to the factory default. You can
start resetting the password.

5.1.4

Setting Up with the Startup Wizard

5.1.4.1

Entering Startup Wizard

The Startup Wizard helps you configure the basic settings to set up the Device.
After you have initialized the Device, the

Startup Wizard

page is displayed.

Summary of Contents for XVR5232AN-I3













































































































































































































































































































































































































Search results

Summary of Contents for XVR5232AN-I3

Reviews:

Related manuals for XVR5232AN-I3

Brands by name

Popular brands

Dahua Technology XVR5232AN-I3, User Manual

Search results

Summary of Contents for XVR5232AN-I3

Reviews:

Related manuals for XVR5232AN-I3

Brands by name

Popular brands