Dahua Technology XVR5232AN-I3, User Manual

Page: 290 / 396

User’s Manual
279
Parameter Description
Port Mapping List
The settings in PAT table correspond to the UPnP PAT table on the router.
Service Name: Name of network server.
Protocol: Type of protocol.
Int. Port: Internal port that is mapped on the Device.
Ext. Port: External port that is mapped on the router.

To avoid the conflict, when setting the external port, try to use the
ports from 1024 through 5000 and avoid popular ports from 1
through 255 and system ports from 256 through 1023.

When there are several devices in the LAN, reasonably arrange the
ports mapping to avoid mapping to the same external port.

When establishing a mapping relationship, ensure the mapping
ports are not occupied or limited.

The internal and external ports of TCP and UDP must be the same
and cannot be modified.

Click to modify the external port.
Click
Apply
to complete the settings.
In the browser, enter http://WAN IP: External IP port. You can visit the LAN Device.
5.15.1.9 Configuring SNMP Settings
This function is available on select models.
You can connect the Device with some software such as MIB Builder and MG-SOFT MIB Browser to
manage and control the Device from the software.
Preparation

Install the software that can manage and control the SNMP, such as MIB Builder and MG-SOFT MIB
Browser

Obtain the MIB files that correspond to the current version from the technical support.
Procedure
Select
Main Menu > NETWORK > SNMP
.