Dahua Technology WizMind IPC-PDBW82041-B360, Operation Manual

Page: 64 / 154

Operation Manual
55
Figure 6-45 Record linkage
6.4.1.2.3 Snapshot Linkage
After snapshot linkage is configured, the system can automatically alarm and take snapshots
when an alarm is triggered.
Prerequisites
After the corresponding alarm type (Normal, Motion, or Alarm) is enabled, the snapshot
channel links capturing picture. For details, see "13.3 Setting Record Plan".
Setting Record Linkage
On the Alarm interface, click to enable snapshot linkage, and select the channel as
needed.
Figure 6-46 Snapshot linkage
6.4.1.2.4 Alarm-out Linkage
When an alarm is triggered, the system can automatically link with alarm-out device.
On the Alarm interface, click to enable alarm-out linkage, select the channel as needed,
and then configure Post alarm .
When alarm delay is configured, alarm continues for an extended period after the alarm ends.
Figure 6-47 Alarm-out linkage
6.4.1.2.5 Email Linkage
When an alarm is triggered, the system will automatically send an email to users.
Email linkage takes effect only when SMTP is configured. For details, see "6.3.5 Email".