Dahua Technology WizMind IPC-PDBW82041-B360, Operation Manual

Page: 118 / 154

Operation Manual
109
Procedure
Step 1 Select
AI
>
Smart Plan
Step 2 Click next to Video Metadata , and then click Next .
Step 3 Click the Rule Config tab.
Step 4 Click
Add Rule
to select rules.
The added rules will be display in the list. Click the text box under Name to edit the
rule name. The rule is enabled by default.
Figure 8-21 Rule Configure (Video Metadata)
Step 5 Configure Picture .
1) Click .
2) Set overlay of motor vehicle, non-motor vehicle and people and the box position.
This section takes the configuration of non-motor vehicle overlay as an example.
Figure 8-22 Picture (non-motor vehicle)
3) Click Apply .
Step 6 (Optional) Click the icons at the right side of the image to filter targets in the image.
● After the rule is enabled, the detection area is displayed. Click
, and you drag
the any corner of the box to adjust the size of the area, and press the left mouse
button and move the box to adjust the position.
● Click
to draw an area exclusion area for face detection in the image, and
right-click to finish the drawing..
● Click
to draw the minimum size of the target, and click to draw the
maximum size of the target. Only when the target size between the maximum size
and the minimum size, can the alarm be triggered.
● Click
, and then press and hold the left mouse button to draw a rectangle, the
pixel size is displayed.
● Click
to delete the detection line.