Dahua Technology WizMind IPC-PDBW82041-B360, Operation Manual

Page: 52 / 154

Operation Manual
43
Figure 6-31 UPnP
Step 2 Click next to Enable , and there are two mapping modes: Custom and Default .
● Select
Custom , click and then you can change external port as needed.
● Select
Default , and then the system finishes mapping with unoccupied port
automatically, and you cannot edit mapping relation.
Step 3 Click Apply .
Open web browser on PC, enter http:// wide area IP address: external port number,
and then you can visit the local area device with corresponding port.
6.3.7 SNMP
SNMP (Simple Network Management Protocol), which can be used to enable software such as
MIB Builder and MG-SOFT MIB Browser to connect to the camera and manage and monitor
the camera.
Prerequisites
● Install SNMP monitoring and managing tools such as MIB Builder and MG-SOFT MIB
Browser.
● Get the MIB file of the matched version from technical support.
Procedure
Step 1 Select > Network > SNMP .