82
6.
Upgrade and Update
This chapter elaborates upgrade methods of the device.
6.1 Aircraft Firmware Update
Note
The aircraft firmware is updated with remote control.
The aircraft, ground station and remote control have to be enabled and connected during
firmware update, which is to make frequency matched.
Warning
Don’t upgrade the firmware during flight!
Step 1 Insert the micro SD card with firmware update package into the micro SD card slot of
the remote control.
Step 2 Select
“Remote Control > Settings > General Settings”. It will display the interface of
“Firmware Update”, as shown in Figure 6-1.
Figure 6-1
Step 3 Select
“Update Now” and it will automatically update and display update progress.
Note
If micro SD card
isn’t inserted, it will display the latest version on the right of firmware.
6.2 Remote Control Update
6.2.1 APP Update
Step 1 Insert the micro SD card with APP update package into the micro SD card slot of the
remote control.
Step 2 Select
“Settings > General Settings”. It will display the current APP version number or
update software on the right of “APP Update”, as shown in Figure 6-2.
Figure 6-2
Summary of Contents for NAVIGATOR X1550
