39
Figure 3-5
Check remaining battery percentage at the upper right corner of the operating system, as
shown in Figure 3-6.
Figure 3-6
The remaining power is required to be ≥ 30% at normal temperature.
The remaining power is required to be ≥ 40% when the temperature is lower than -10
℃
.
3.3 Charging
Note
It doesn't need to implement the following chapter if the remaining power is enough.
3.3.1 Aircraft Battery Charging
The entire charging period (from 0 to 100) is about 2 hours. Charging period is related with
remaining power and charging current (power).
Figure 3-7
Step 1 Open the battery cover, unfasten the battery fixing band and take out battery.
Step 2 Connect charging adapter cable to the 6S balance port and charging power port of the
charger, and connect the charger to AC power.
Step 3 Insert the battery into the battery port of the charging adapter cable.
Step 4 Rotate the black button and select BLC.
Step 5 Press the button. The value displayed by LED nixie tube bounces and flashes. And
then, turn the button to adjust current which is recommended to be 15A. Press the
button again to select after adjustment is over.
Summary of Contents for NAVIGATOR X1550
