33
2.4.3.2
System Status Display
2.4.3.2.1
Status Display Bar 1
Figure 2-31
Icon
Name
Function
Alarm
information
View all alarm information that appeared on the main
interface.
Note
In case of alarm prompt, there is a yellow framed
alarm information on video preview interface. It lasts
for 10 seconds and then disappears.
GPS
satellite
amount
and
precision
Check whether all parameters conform to flight
conditions of the aircraft or not.
The number at the top right corner is the GPS
satellite amount. When the GPS amount is
equal to or larger than 6, the aircraft is allowed
to take off.
The number at the bottom right corner is the
GPS horizontal precision. When the precision is
equal to or smaller than 1.0, the aircraft is
allowed to take off.
Note
The aircraft can take off after both conditions are
met. If only one condition is met or both are not met,
the aircraft cannot take off.
Remaining
power
percentage
View aircraft remaining power. Please terminate the
flight as soon as possible and replace the aircraft
battery if the remaining power percentage is too low.
Flight mode
Display current flight mode of aircraft.
Please refer to “4.1 Flight Mode” for detailed
operation methods.
Note
Flight mode displayed on the ground control station
and remote control are the same.
Table 2-14
Summary of Contents for NAVIGATOR X1550
