40
Step 6 Short press the battery indicator light button once, and then long press it for 3 seconds,
turn on the electric quantity indicator light.
Step 7 Long press the button to start charging and wait for the charger prompt. It means
charging is completed when the charger beeps for 5 times and LED nixie tube
displays DONE.
Figure 3-8
Step 8 Disconnect it from the power socket, and then disconnect other cables after charging is
completed.
Note
Note: During charging of power battery, charging is completed when the charger
displays “FULL” and beeps. Don’t take down batteries before charging is completed.
3.3.2 Remote Control Charging
The entire charging period (from 0 to 100) needs approximately 3.5 hours.
Please charge the remote control when its power is off.
Step 1 Connect the remote control to power adapter with a charging cable.
Figure 3-9
Step 2 Connect power adapter to AC power (AC 100V-240V).
Step 3 Check charging status: it means the remote control is charging when the indicator light
is red and normally on. It means charging is done when the indicator light becomes
green and normally on, as shown in Figure 3-10.
Figure 3-10
Step 4 Disconnect it from the power socket, and then disconnect other cables after charging
is completed.
3.3.3 Ground Station Charging
The entire charging period (from 0 to 100) needs approximately 3.5 hours.
Summary of Contents for NAVIGATOR X1550
