4-14 Inspection, Maintenance and Adjustment
022-00028AE Operation and Maintenance Manual
1.
Remove fill cap from radiator (Figure 19). Check level of coolant inside radiator. If low, add coolant to
fill radiator to a point that is 10 – 20 mm (1/2 – 3/4") below top of overflow pipe. If temperature is
below freezing, see “Check Antifreeze Protection Levels” on page 4-14 for antifreeze protection. Use
the table to calculate a proper mixture of anti-freeze and water to provide level of protection
necessary for expected temperature.
CHECK ANTIFREEZE PROTECTION LEVELS
CHECK LEVEL OF WINDOW WASHER
LIQUID
1.
Check fluid level in windshield washer
tank, in the storage box of the rear of the
seat.
2.
Open fill cap and add fluid.
NOTE:
Use a washer liquid that is rated
for all seasons. This will prevent
freezing during cold weather
operation.
INSPECT THE BUCKET TEETH AND SIDE
CUTTERS FOR SIGNS OF WEAR
1.
On a daily basis, inspect bucket teeth to
make sure that tooth wear or breakage has
not developed.
2.
Do not allow replaceable bucket teeth to
wear down to the point that bucket adapter
is exposed. (Figure 21)
NOTE:
These instructions are only for
Daewoo OEM buckets. If you
are using other manufacturers’
buckets, refer to their specific
instructions.
Ambient Temperature
Cooling Water
Antifreeze
-10°C (15°F)
80%
20%
-15°C (5°F)
73%
27%
-20°C (-5°F)
67%
33%
-25°C (-15°F)
60%
40%
-30°C (-20°F)
56%
44%
-40°C (-30°F)
50%
50%
Figure 20
Figure 21
