Daewoo Mega 200-V Operation And Maintenance Manual Download Page 10

Page: 10 / 200

1-4 Safety

022-00028AE Operation and Maintenance Manual

WARNING FOR OPERATION, INSPECTION AND MAINTENANCE (4190-2545, 190-00092)

WARNINGS WHEN OPENING ENGINE HOOD (2190-2525, 190-00095)

CAUTION!

•

Read manual and labels before
operation and maintenance.
Follow instructions and warnings
in manual and on labels on
machine.

•

Sound horn to alert people
nearby before operating, and
make sure all persons are clear
of area.

•

Always make sure when leaving
operator’s seat to:

•

Lower bucket or other
working tools to ground.

•

"LOCK" transmission selector in "NEUTRAL."

•

Set park brake.

•

Turn starter switch "OFF." Remove key from switch.

•

If hydraulic components and units are ABNORMAL, consult nearest DAEWOO dealer
or authorized service shop. Do not attempt to make an overhaul.

WARNING!

Before opening bonnet, shut down
engine.

ACO1360L

ACO1420L

Summary of Contents for Mega 200-V









































































































































































































Search results

Summary of Contents for Mega 200-V

Reviews:

Related manuals for Mega 200-V

Brands by name

Popular brands

Daewoo Mega 200-V, Operation And Maintenance Manual

Search results

Summary of Contents for Mega 200-V

Reviews:

Related manuals for Mega 200-V

Brands by name

Popular brands