022-00028AE Operation and Maintenance Manual
Inspection, Maintenance and Adjustment 4-23
MEGA 200-VTC
1.
Following fittings are greased daily, or every 10 hours, for first 100 hours of operation to comply with
new machine break-in requirements. After that, greasing should be done every 50 hours. If bucket is
being used in water, grease fittings immediately after machine is removed from water.
A:
Bucket hinge pins, 2 locations on
each side of bucket. Arm link
connecting pins, 2 locations. (Figure
41)
C
B
D
A
BFO0030P
Figure 40
Figure 41
