4-44 Inspection, Maintenance and Adjustment
022-00028AE Operation and Maintenance Manual
3.
Clean area around level plug (1, Figure 80)
and drain plug (2) on center differential.
Remove level plug and drain plug. Allow oil
to drain into a container.
4.
Install drain plug into center differential,
and tighten it.
5.
Pump oil into plug hole for level plug on
center differential. Add oil until oil level is
even with bottom of plug hole.
6.
Go to level plug holes (1, Figure 81) on
axle ends. Add oil to these openings until
oil level is even with bottom of plug hole.
Recheck level on center differential. Add
oil if necessary. When oil level is
satisfactory at all three level plug holes,
install and tighten level plugs at all three
locations.
7.
Repeat procedure for other axle.
Figure 80
Figure 81
