background image

13

Connecting to Audio/Video Equipment

Before connecting

Refer also to the instruction manual of each component to be connected.
When you connect the machine to audio/video equipment, be sure to turn off the power and unplug all the units from the wall 
outlets before making any connections.
Connect the plugs securely.

To video input

To video output

To audio input

To audio output

To S video input

Audio/Video

connection

cable

S Video

connection cable

12

Connecting to a TV

Before connecting

Refer also to the instruction manual of the TV.

When you connect the machine to the TV, be sure to turn 
off the power and unplug both the units from the wall 
outlets before making any connections.

Connect the machine to the TV directly. If you connect the 
machine to a VCR, TV/VCR combination, or video selector, 

the playback picture may be distorted as DVD videos are 
copy protected.

Note that one video connection cable for monitor out is 

supplied..

Automatically switched to the TV set A/V mode(DVD, 

Video)
Do not change to Video Aspect Ratio.

Connecting to a TV without Color Difference Inputs

If the TV or monitor is equipped with an S video input, make the S video connection in addition to the normal video connection.

The S video connection will provide higher quality picture playback.

Connecting to a TV with Color Difference Inputs

If the TV or monitor is equipped with the color difference inputs, select the connection on the above. 
Connecting to these inputs allows you to enjoy higher quality picture playback compared to the above connection.

Notes

Actual labels for color difference inputs may vary depending on the TV manufacturer (ex. Y/Cb/Cr, Y/R-Y/B-Y , Y/P

b

/P

r

or Component 

video).
In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. 
In such a case, adjust the TV or monitor for optimum performance.

Caution
You may need to maximize the volume of the TV speaker(s) when you carry out steps in "Speaker Setup".
Be sure to turn down the volume of the TV speaker(s) before changing the TV source input and using the TV speaker(s) as a
normal TV speaker(s).

G

etting
S

ta

rte

d

for EU version: optional

21-Pin SCART Cable(not included) to 21-pin SCART input terminal on TV
SCART Specification : Composite and Component Video output(DVD, Video)Audio L/R Output(DVD only)

Summary of Contents for HC-4130
























Reviews: