Once the initial settings have been completed, the player can always be operated under the same conditions whenever the
power is switched on. These settings are called SETUP data that are easily modified and stored using the SETUP menu. The
SETUP menu includes the information for AUDIO and other system controls.
SETUP MENU
Customizing the Function Settings
ITEM and DESCRIPTIONS
Control the output condition of digital coaxial out.
Note : When “ON” is selected, DELAY TIME of each speaker can
not be accessed.
DIGITAL OUT
FRONT POS.
CENTER POS.
REAR POS.
TEST TONE
MAIN PAGE
Customizing the Function Settings
SETUP MENU
SPEAKER SETUP
In Dolby Digital or Dolby Pro Logic mode it is assumed that the
time it takes the sound from each speaker to reach the listener, is
the same. But if the time interval from the center or rear left and
right speakers to the listener is closer than the time interval from
the listener to the front left and right speaker, the sound of center or
rear left and right speaker will reach the listener first; instead of the
sound of the front speakers. (It is desirable that the sound from the
front speakers reach the listener first.)
Dolby Digital and Dolby Pro Logic modes provide speaker time
delay adjustments to resolve this problem:; you can manually set
delay time of the center or rear left and right speakers so that the
sound from all speakers will arrive simultaneously to the listener.
Turn on the TEST TONE for the speaker’s relative volume balance
from the listening position to each speaker.
Select MAIN PAGE and press ENTER to exit the Speaker setup.
ITEM and DESCRIPTIONS
Select the video output signal formats from the machine.
Because VIDEO OUTPUT is useful only for selected signal format, select the
appropriate item matching with TV input function.
Note : The machine has component jack instead of scart jack in accordance with
region. Though you select RGB, the machine having component jack is
not useful for RGB video signal format.
AUDIO : Select a preferred language for the sound track.
SUBTITLE : Select a preferred language for subtitles.
DISC MENU : Select a preferred language for menus.
Note : Selecting languages in the SET UP can be changed
/ added/ deleted in accordance with region.
Change the your settings to defaults.
This function is to disable the playing of specified DVD that are unsuitable for
children. As each disc has slightly different codes, please refer to the disc
instruction. There are 8 levels. If the level is 8, the contents of the disc are suitable
for adult. If the level is 1, the contents of the disc are suitable for child. If you didn't
set a new password and level, there is no restriction playing discs.
When you turn on this unit for the first time, setting the new password is
recommended
Set/Change the password for the parental lock.
If it is the first time changing password, input “0000” on old PASSWORD.
A
dv
an
ced
DVD/A
ud
io
C
D
Op
er
at
io
n
38
39
NORMAL/PS
NORMAL/LB
WIDE
MULTI
NTSC
PAL
ENGLISH
GERMAN
FRENCH
DUTCH
ITALIAN
SPANISH
FULL
;
6/8
:
4/8
:
2/8
:
OFF
TV DISPLAY
TV TYPE
OSD LANG
DYNAMIC
OFF
ON
30 FT/ 9.2 M
:
:
:
:
5 FT / 5.2 M
ON
OFF
S-VIDEO
R, G, B
ENGLISH
GERMAN
FRENCH
DUTCH
ITALIAN
SPANISH
RESET
1 G
2
3 PG
4 PG13
5
6 PG-R
7 NC-7
8 ADULT
9 NO-
PARENTAL
CHANGE
VIDEO OUT
AUDIO
SUBTITLE
DISC MENU
DEFAULT
PARENTAL
(DVD only)
PASSWORD
(DVD only)
Set up TV aspect according to your TV set. If WIDE screen is supported on
your TV, select WIDE.
If your TV supports only 4:3, you may select both NORMAL/ PS (Pan & Scan)
and NORMAL/LB (Letter Box).
When using a wide screen TV (16:9 aspect ratio)
Select WIDE in the TV ASPECT value.
Discs may be recorded in more than one screen format. Following the chart
below, make screen aspect adjustments in your wide screen TV according to
the aspect ratio on the disc you are viewing.
When using a standard TV (4:3 aspect ratio)
Select NORMAL/LB (Letter Box) or NORMAL/PS (Pan & Scan) in the TV
ASPECT value.
Following the chart below, make screen aspect adjustments according to the
aspect ratio on the disc you are viewing.
Set up TV type according to type supported by your TV or monitor. When you
select MULTI, the output video type is dependent on the disc loaded. If the
recorded video type is PAL then it outputs PAL. If NTSC then NTSC.
This item is to select the language for On-Screen Display messages that will be
displayed on the TV screen. When your desired language is selected, all OSD
messages are displayed in the selected language.
Note :
Selecting languages in the SE UP can be changed
/ added/ deleted in accordance with region.
Dynamic Range Control. (Valid for Dolby Digital DVD disc)
When programs with wide dynamic range,such as movie soundtracks, are
played at low volume or from smaller speakers, the system can apply
appropriate compression to preserve low-level content and prevent dramatic
passages from getting too loud.
The degree of compression can be made to vary according to need.
If your want to hear the original dynamic range recorded on disc set the
DYNAMIC to of OFF.
Otherwise set to FULL then the dynamic range is reduced by bringing down the
level of the loud sounds and bringing up the level of the quiet sounds.
