Maintenance Section
-186-
Replace Gasoline Primary Fuel
Filter(G424E/G430E Dual Fuel Only)
Park the lift truck in an authorized refueling area
with the forks lowered, parking brake applied and
the transmission in Neutral.
1.
Place the fuel select switch in the Gasoline
position. Remove the fuse for the electric fuel
pump.
2.
Start and run the engine until the fuel in the
system runs out of fuel and the engine stops.
Turn off the ignition switch.
3.
Replace the fuel filter taking care to install the
new filter with flow in the proper direction.
When replacing the Primary fuel filter use a
hose clamp between the tank and the filter to
prevent fuel from spilling during replacement.
4.
Re-install the fuse for the pump and crank the
engine several times before attempting a start
to prime the fuel pump.
NOTE:
Replacement interval of Secondary fuel
filter is 2,500 hrs or 15 months
G424E Dual Fuel
.(1) Primary fuel filter. (2) Fuel pump. (3) Secondary fuel filter.
G430E Dual Fuel
(1) Primary fuel filter. (2) Fuel pump. (3) Secondary fuel filter.
Inspect the Fuel Pump Insulated
Mounting Clamps(G424E/G430E
Dual Fuel Only)
1.
Check the rubber insulation on the electric fuel
pump mounting clamps.
2.
If the housing of the pump makes contact with
the engine chassis a ground path can be
created causing the pump to run anytime the
ignition key is in the ON position and the fuel
select switch is in GAS position.
3.
If the clamp insulation is damaged replace the
clamp with a new insulated clamp.
WARNING
When assembling the filters, check the arrow
mark on the filter surface.
The arrow mark position is same as fuel flow
direction.
1
2
3
1
2
3
