Operation Section
-65-
Operator's Station and Monitoring Systems
Instrument Panel
Diesel
LPG/GAS
1.
Engine Oil Pressure Indicator Light
-
Indicates insufficient engine oil pressure.
The light will come on when the ignition
switch is turned to the ON position. The
light should go off after the engine is started. If the
light turns on while operating the lift truck,
insufficient engine oil pressure is indicated. Park
the lift truck and stop the engine.
2. Alternator Indicator Light -
Indicates if
the battery charging system is operational.
The light will come on when the ignition
switch is turned to the ON position.
The light should go off after the engine is started,
indicating the alternator is producing sufficient
voltage to charge the battery. If the light turns on
with the engine running, check the alternator
charging system for a malfunction.
3. Diesel Engine Start Preheat
Indicator Light -
The light will come ON
when the key is turned to the ON position
from the OFF position. This indicates that
the glow plugs are preheating the pre-combustion
chambers for easier starting.
The amount of time needed to preheat the
pre-combustion chambers is approximately seven
seconds, depending on the surrounding air
temperature. When the light goes OFF the
maximum pre-combustion chamber temperature
has been reached and the key can be turned to the
START position to start the engine.
4.
Diesel Engine Water in Fuel Filter
Indicator Light -
Indicates when the
engine is running, there is water in the
fuel filter exceeds 100cc.
The light will come ON when the ignition switch is
turned to the ON position. The light should go off
after the engine is started. If the light turns on with
the engine running, park the lift truck and stop the
engine.
Drain some fuel (and any water) until clean fuel
flows from the filter which approximately takes 5 to
6 seconds.
5. Fuel Level Gauge -
Indicates fuel
level (Gas, Diesel, or Dual Fuel Trucks
Only)
6. Engine Coolant Temperature Gauge
-
Indicates coolant temperature. If the
pointer moves beyond the green band
while operating the lift truck, overheating
is indicated. Park the lift truck and stop the engine.
Check the cooling system for a malfunction. The
pointer will be at the end of the green band when
the coolant temperature reaches approximately
106°C (223°F) on all engines.
7. Transmission Oil Temperature
Gauge -
Indicates transmission oil
temperature. If the pointer moves beyond
the green band while operating the lift truck,
excessive transmission oil temperature is indicated.
Park the lift truck and stop the engine.
ILOO001P
3 4
1
2
5
6
7
9
IB1O003L
8
1
2
5 6
7
9
