Dabi Atlante Spectro 70X Series, Owner'S Manual

Page: 11 / 44

11
Cooling - Sb
The device presents protection against excessive heating of the tube.
A new image can be performed only after a time equivalent of 30 times the trigger time, necessary
time for natural cooling and return of normal functions.
Ex: Trigger time = 0,06 seconds.
Cooling time = 0,06seconds X 30 = 1,8 seconds.
Thermal protection
The device has a safety mechanism against temperature elevation of the transmitter assembly.
A thermal protection turn the device’s functions off if the internal temperature of the transmitter
assembly overpasses the allowed limit , damaging the internal components of the assembly.
Protection against acidental activation
The equipment has an electronic blocking mechanism against acidental activations, preventing
consecutive activations, eliminating unecessary exposure to radiation and overheating of the
emission set.
Under current protection
The equipment features a safety device for over-current by means of 3 fuses, being 2 of them for
power supply and one for electronic circuit.
Overvoltage Protection
The device has a safety mechanism for overvoltage in device power supply that does not allow
trigger when power supply overpasses approximately 3 Volts of specified limits.
Undervoltage Protection
The device has a safety mechanism for undervoltage in device power supply that does not allow
trigger when power supply it goes inferior the 10 V~ of specified limits.
Trigger
The button must be continuously pressed until the end of transmission, monitored by a sound signal
(beep), that is, if the button activation is interrupted, the transmission will also be automatically
interrupted , by indicating at display “A4”.
TECHNICAL SPECIFICATIONS
General features