da Vinci Technologies EE Pro User Manual Download Page 236 | Manualshive

Page: 236 / 249

background image

EE Pro for TI - 89, 92 Plus
Appendix B: Warranty and Technical Support

5

Appendix B

Warranty, Technical Support

B.1 da Vinci License Agreement

By downloading/installing the software and/or documentation you agree to abide by the following
provisions.

1. License: da Vinci Technologies Group, Inc. (“da Vinci”) grants you a license to use and copy the software

program(s) and documentation from the linked web/CD page (“Licensed Materials”).

2. Restrictions: You may not reverse-assemble or reverse-compile the software program portion of the Licensed

Materials that are provided in object code format. You may not sell, rent or lease copies that you make.

3. Support: Limited technical support is provided through Texas Instruments Incorporated. Details are listed

below.

4. Copyright: The Licensed Materials are copyrighted. Do not delete the copyright notice, trademarks or

protective notice from any copy you make.

5. Warranty: da Vinci does not warrant that the program or Licensed Materials will be free from errors or will

meet your specific requirements. The Licensed Materials are made available “AS IS” to you are any
subsequent user.

Although no warranty is given for the License Material, the media (if any) will be replaced if found to be
defective during the first three (3) months of use. For specific instructions, contact the TI webstore via
www.ti.com. THIS PARAGRAPH EXPRESSES da Vinci’s MAXIMUM LIABILITY AND YOUR SOLE
AND EXCLUSIVE REMEDY.

6. Limitations: da Vinci makes no warranty or condition, either express or implied, including but not

limited to any implied warranties of merchantability and fitness for a particular purpose, regarding the
Licensed Materials.

7. Restricted Rights: The Licensed Materials are provided with Restricted Rights. Use, duplication or disclosure

by the United States Government is subject to restrictions as set forth in subparagraph [c](1)(ii) of the Rights
in Technical Data and Computer Software clause at DFARS 252.227-7013 or in subparagraph [c](1) and (2)
of the Commercial Computer Software – Restricted Rights at 48 CFR 52.227-19, as applicable.

In no event shall da Vinci or its suppliers, licensers, or sublicensees be liable for any indirect, incidental
or consequential damages, lost of profits, loss of use or data, or interruption of business, whether the
alleged damages are labeled in tort, contract or indemnity.

«
...
234
235
236
237
238
...
»

Summary of Contents for EE Pro


























































































































































































































































Reviews:

No comments

Related manuals for EE Pro

ANTIVIR VIRUS SCAN ADAPTER FOR SAP SOLUTIONS

Brand: AVIRA Pages: 67

NETWORK AND SECURITY MANAGER 2010.4 - REV1

Brand: Juniper Pages: 244

Brand: Sony Pages: 2

ICDBM1 - Memory Stick Media Digital Voice Recorder

Brand: Sony Pages: 1

ICDBM1 - Memory Stick Media Digital Voice Recorder

Brand: Sony Pages: 2

ICD-BP150 - Ic Recorder

Brand: Sony Pages: 2

D-NS921F - Portable Cd Player

Brand: Sony Pages: 2

Brand: Sony Pages: 9

Music Box v.2.1.0

Brand: Sony Pages: 12

Memory Stick Autorun v1.3

Brand: Sony Pages: 24

ICD-R100 Operating Instructions (primary manual)

Brand: Sony Pages: 22

ICD-BP100 - Ic Recorder

Brand: Sony Pages: 32

Image Converter 2 Plus

Brand: Sony Pages: 40

Brand: Sony Pages: 34

ICDBM1 - Memory Stick Media Digital Voice Recorder

Brand: Sony Pages: 44

ICD-BP100 - Ic Recorder

Brand: Sony Pages: 68

Brand: Sony Pages: 72

ICD-R100 Operating Instructions (primary manual)

Brand: Sony Pages: 96

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands