9
PARTS & FUNCTIONS
Dual Ports
- Consistently provides steadier, more balanced
and farther launch.
Rubber O-Ring
- Creates a seal within the Dummy Tube to
allow pressure buildup for launch.
Launching Pressure Vent Hole
- Pressure from the fired
power load builds through this hole and out the Dual Ports
into the Dummy Tube.
Deep Well Flash Pan
- Dummy rests on this area when
inserted. Also provides protection from the exhausts when
dummy is launched.
Shell Chamber
- Chamber to insert blank power load.
Shell Extractor
- Easily extracts a used power load from
the chamber without the use of any other tools.
Wide Nylon Comfort Grip Handle Sleeve
- Provides wide,
comfortable grip for maximum control during launches.
Thick, Dense Recoil Pad
- Keeping hand against this pad
provides comfort and protection during recoil from launches.
Self-Contained Firing Pin Mechanism
- Spring-loaded
firing pin that strikes the power load for launch. Easily re-
movable for convenient cleaning and maintenance.
Firing Pin Pull Knob
- Pull and release to launch dummy.
Dual Exhaust Holes
- Releases additional pressure from
launch for greatly reduced recoil.
Locking Lever
- Lever allows opening and lockdown of the
dummy launcher for access to the power load.
