11
1. Grasp Launcher firmly in one hand. Always place the
heel of your hand against the Recoil Pad (Fig.1) to avoid
injury caused by the recoil.
Never place your thumb
against the Recoil Pad (Fig.2).
2. Point Launcher in the direction you
wish to send the dummy (different
power load levels and different angles
will produce varied ranges of dummy
launch).
3. Hold Launcher away from body.
4. Pull Firing Pin Pull Knob with your
free hand all the way back and re-
lease.
5. If blank power load cartridge does not fire or misfires
remove it and replace with a new cartridge.
Never re-
use misfired power loads.
FIRING LAUNCHER
WARNING - Review the Safety Warnings on p.4 and
familiarize yourself with all Parts & Functions on p.8-9
before operating this launcher.
CORRECT
Fig. 1
INCORRECT
Fig. 2
NOTE
- The Firing Pin is designed to hit toward the edge
of the power load (rim-fire), not the center.