10
Use only Crimped .22 Caliber Blank Power Loads.*
Green or Yellow levels recommended.*
Green = Light to Moderate Recoil (50-80 yard launch)
Yellow = Moderate to Firm Recoil (70-110 yard launch)
1. Lift up Locking Lever.
2. Open Launcher.
3. Insert desired blank power load car-
tridge into Shell Chamber.
4. Close Launcher.
5. Return Locking Lever to original closed
position.
6. Slide Launcher Dummy onto launcher.
7. Rotate Launcher so that the slot in the
Recoil Pad and the Locking Lever are
facing away from you.
8. Do not handle the Firing Pin Pull Knob until you are
ready to fire the launcher.
LOADING LAUNCHER
WARNING - Review the Safety Warnings on p.4 and
familiarize yourself with all Parts & Functions on p.8-9
before operating this launcher.
*CAUTION - Do not use wadded power loads as the
wad material could clog the launcher. Red power
loads can be used, but are not recommended as they
will cause accelerated wear and tear on the launcher
and the dummy.
Never pull and release the Firing Pin Pull Knob with an
empty Chamber.
This is known as “Dry Firing” and can
severely damage the Chamber/Firing Pin, making power
load cartridge insertion and removal very difficult. Damage
caused by Dry Firing is not covered under the warranty.
