D-Link xStack DGS-3120 Series, Cli Reference Manual

Page: 619 / 1150

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
614
Chapter 59 MD5 Configuration
Command List (RI Mode
Only)
create md5 key <key_id 1-255> <password 16>
config md5 key <key_id 1-255> <password 16>
delete md5 key <key_id 1-255>
show md5 {key <key_id 1-255>}
59-1 create md5
Description
This command is used to create an MD5 key table.
Format
create md5 key <key_id 1-255> <password 16>
Parameters
<key_id 1-255> - Enter the MD5 key to be added. This key must be between 1 and 255.
<password 16> - Enter an alphanumeric string of between 1 and 16, case-sensitive characters,
used to generate the Message Digest which is in turn used to authenticate OSPF packets
within the OSPF routing domain.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To create an MD5 key table:
DGS-3120-24TC:admin#create md5 key 1 dlink
Command: create md5 key 1 dlink
Success.
DGS-3120-24TC:admin#
59-2 config md5
Description
This command is used to configure an MD5 key and password. The MD5 Configuration allows for
the entry of a 16 character Message Digest - version 5 (MD5) key which can be used to