4 Configuration
D-Link Web Smart Switch User Manual
48
Enabled –
Enables the link aggregation configured on the port.
Disabled –
Disables the link aggregation configured on the port.
Maximum Frame Size:
Specifies whether the Maximum Frame Size is enabled on the port. The possible
field values are:
Enabled –
Enables the Maximum Frame Size configured on the port.
Disabled –
Disables the Maximum Frame Size configured on the port.
Define these parameter fields. Click
Apply
to implement changes made and click
Refresh
to refresh the
table information.
L2 Functions > LLDP > LLDP Management Address Settings
The LLDP Management Address Settings allows the user to set management address which is included in
LLDP information transmitted.
Figure 4.65 – L2 Functions > LLDP > LLDP Management Address Settings
From Port/To Port:
A consecutive group of ports may be configured starting with the selected port.
Address Type:
Specify the LLDP address type on the port. The value is always IPv4.
Address:
Specify the address.
Port State:
Specify whether the Port State is enabled n the port. The possible field values are:
Enabled –
Enables the port state configured on the port.
Disabled –
Disables the port state configured on the port.
Click
Apply
to implement changes made.
L2 Functions > LLDP > LLDP Management Address Table
The LLDP Management Address Table page displays the detailed management address information for the
entry.
Figure 4.66 – L2 Functions > LLDP > LLDP Management Address Table
Management Address:
Select IPv4 or IPv6 address and enter the IP address. Click
Search
and the table
will update and display the values required.
Subtype:
Displays the managed address subtype. For example, MAC address or IPv4 address.