4 Configuration
D-Link Web Smart Switch User Manual
42
default value is 1 second.
Query Interval (60-600 sec):
The Query Interval is the interval between General Queries sent. By adjusting
the Query Interval, the number of MLD messages can increase or decrease; larger values cause MLD
Queries to be sent less often. Default is 125 seconds.
Max Response Time (10-25 sec):
Specifies the time interval in seconds after which a port is removed from
the Multicast membership group. Ports are removed from the Multicast membership when the port sends a
Done Message, indicating the port requests to leave the Multicast group. The field range is 10-25 seconds.
The default timeout is 10 seconds.
Click
Apply
to implement changes made.
MLD Snooping VLAN Settings List:
Click the number of VLAN ID to modify the settings:
Figure 4.56 – L2 Functions > Multicast > Multicast Forwarding
State:
Specify the state of MLD Snooping VLAN to be enabled or disabled.
Querier State:
Specify the querier state to be enabled or disabled.
Fast Leave:
Specify the fast leave feature to be enabled or disabled.
Click
Apply
to implement changes made.
Static Router Ports:
Selects the ports to be static router ports and assigned for MLD snooping for the VLAN.
Dynamic Router Ports:
Select the ports to be dynamic router ports and assigned for MLD snooping for the
VLAN.
Click
Apply
for changes to take effect.
L2 Functions > Multicast > Multicast Forwarding
The Multicast Forwarding page displays all of the entries made into the Switch’s static multicast forwarding
table. To implement the Multicast Forwarding Settings, input
VID
,
Multicast MAC Address
and port settings,
then click
Add
.
