D-Link ShareCenter DNS-343 User Manual Download Page 74

Page: 74 / 97

D-Link DNS-343 User Manual

USB Print Server

The DNS-343 features a built-in USB print server, giving users the ability to share a printer on their local network. Connect a USB printer to the USB port on the back of the

DNS-343. It is important to ensure that any of the printer manufacturer’s drivers are already installed on any computer you want to print from.

3. The Windows® Add Printer Wizard will launch:

Click Next to continue.

2. Select “Add a printer”.

1. To add a printer:

Click Start and select Printers and Faxes.

4. When prompted to choose a local, or network printer, select “A network printer,

or a printer attached to another computer.” Click Next to continue.

Summary of Contents for ShareCenter DNS-343


































































































Search results

Summary of Contents for ShareCenter DNS-343

Reviews:

Related manuals for ShareCenter DNS-343

Brands by name

Popular brands

D-Link ShareCenter DNS-343, User Manual

Search results

Summary of Contents for ShareCenter DNS-343

Reviews:

Related manuals for ShareCenter DNS-343

Brands by name

Popular brands