D-Link ShareCenter DNS-343 User Manual Download Page 15

Page: 15 / 97

D-Link DNS-343 User Manual

Step 6

- Choose whether to use the EXT2 or EXT3 file system on the DNS-343

from the drop-down.

Click Next to continue.

Step 7

- The following window appears to indicate the progress of the disk

formatting.

Step 8

- When formatting of the drive completes, the DNS-343 will display the

results of the disk formatting:

Click Restart to restart the DNS-343.

Step 9

- A warning message informs you that it will take a minute for the DNS-

343 to restart.

Click OK to restart the DNS-343.

Step 10

- When the restart is complete, the login screen will appear:

Note: After logging in to the DNS-343 for the first time it is recommended to add a

password to the admin account. (See Step 3)

Summary of Contents for ShareCenter DNS-343


































































































Search results

Summary of Contents for ShareCenter DNS-343

Reviews:

Related manuals for ShareCenter DNS-343

Brands by name

Popular brands

D-Link ShareCenter DNS-343, User Manual

Search results

Summary of Contents for ShareCenter DNS-343

Reviews:

Related manuals for ShareCenter DNS-343

Brands by name

Popular brands