D-Link ShareCenter DNS-343 User Manual Download Page 11

Page: 11 / 97

D-Link DNS-343 User Manual

3. Insert a 3.5” SATA hard drive into each available drive bay. Make sure to

align the drive connectors to the SATA connectors on the bottom edge inside

the drive bay of the DNS-343. Gently push the drive in until it connects. When

a drive is inserted properly, you will feel it “seat” into the connector. Some

hard drives that are thin or oddly shaped may need to be guided carefully into

position.

4. Attach the faceplate to the front of the device.

5. Connect an Ethernet cable to the available Ethernet port. This cable should

connect the DNS-343 to your local network via a router or switch, or directly to

a computer for configuration.

6. Connect the supplied power adapter to the power receptacle.

7. Connect a USB printer. (Optional)

Summary of Contents for ShareCenter DNS-343


































































































Search results

Summary of Contents for ShareCenter DNS-343

Reviews:

Related manuals for ShareCenter DNS-343

Brands by name

Popular brands

D-Link ShareCenter DNS-343, User Manual

Search results

Summary of Contents for ShareCenter DNS-343

Reviews:

Related manuals for ShareCenter DNS-343

Brands by name

Popular brands