D-Link ShareCenter DNS-343 User Manual Download Page 56

Page: 56 / 97

D-Link DNS-343 User Manual

Power Management Page

The DNS-343 Power Management feature allows you to configure the drives to shut

down while power remains constant to the device. The drives will power up again

when data is accessed.

Use the radio buttons to Enable or Disable the Hard

Drive Hibernation feature.

Use the drop-down menu to set the amount of time

before idle drives will be shut down.

Click the Enable radio button to automatically restart

the DNS-343 after an unexpected shutdown or after a

power failure.

HDD Hibernation:

Turn off Hard Drives:

Power Recovery

Settings:

Please Note:

If the hard drive does not hibernate after the hibernation time you have set has passed, please make sure that:

1. BitTorrent is disabled and/or all download seeds are stopped.

2. There is no read/write access to the UPnP AV or iTunes server.

3. No one is using the easy search utility to discover the D-Link NAS or mapping/disconnecting a drive.

Summary of Contents for ShareCenter DNS-343


































































































Search results

Summary of Contents for ShareCenter DNS-343

Reviews:

Related manuals for ShareCenter DNS-343

Brands by name

Popular brands

D-Link ShareCenter DNS-343, User Manual

Search results

Summary of Contents for ShareCenter DNS-343

Reviews:

Related manuals for ShareCenter DNS-343

Brands by name

Popular brands