D-Link ShareCenter DNS-343 User Manual Download Page 28

Page: 28 / 97

D-Link DNS-343 User Manual

Quotas Page

The DNS-343 supports storage quotas for both groups and individual users.

Assigning a quota to a group or user will limit the amount of storage they are located.

By default, users and groups do not have a quota.

Please see Knowledge Base Section for a Quota Configuration example.

User quotas are displayed here. Quotas can be edited

by clicking on the Notepad icon.

Group quotas are displayed here. Quotas can be edited

by clicking on the Notepad icon.

Displays the current status of the quota feature. The

quota function can be started or stopped here.

User Quota Settings:

Group Quota

Settings:

Quota Status:

Summary of Contents for ShareCenter DNS-343


































































































Search results

Summary of Contents for ShareCenter DNS-343

Reviews:

Related manuals for ShareCenter DNS-343

Brands by name

Popular brands

D-Link ShareCenter DNS-343, User Manual

Search results

Summary of Contents for ShareCenter DNS-343

Reviews:

Related manuals for ShareCenter DNS-343

Brands by name

Popular brands