9
Hardware Installation
Connect an Ethernet cable
Connect an Ethernet cable to the network
cable connector located on the Internet
Camera’s rear panel and attach it to the
network.
Attach the external power supply
Attach the external power supply to the DC
power input connector located on the
Internet Camera’s rear panel and labeled
DC 12V and connect it to your local power
supply.
The Internet Camera comes with a camera
stand with a swivel ball screw head that
can be attached to the Internet Camera
bottom bracket cavity. Attach the camera
stand to the Internet Camera and station it
for your application. There is a hole located
in the base of the camera stand allowing
the Internet Camera to be mounted on the
ceiling or any wall securely.
Connecting the Internet Camera to the Camera Stand
When you have a proper connection the LED will turn from red to green. The
light may cycle on and off and your computer may show an intermittant loss
of connectivity, this is normal until you have configured your Internet Camera.
