29
Configuration > Advanced > Motion Detection
Click the
Motion Detection
button from the Configuration screen to access
settings that effect how the DCS-2000 Internet Camera can serve as a
security device by recording only when motion is detected.
Click
Motion Detection
Enable motion detection
-
Check this option to turn on the motion detection.
New -
Click on this button to add a new window. At most,
three windows can exist at the same time. Use the
mouse to drag the window frame to resize or the title
bar to move. Clicking on the ‘x’ at the upper right
corner of the window can delete the window.
Remember to save to validate the changes.
Save -
Click on this button to save the related settings
regarding to the window. A graphic bar will rise or fall
depending on the image variation. A green bar means
the image variation is under monitoring level and a
red bar means the image variation is over monitoring
level. When the bar goes red, the detected window
will also be outlined in red. While back to the
homepage, the monitored window will hide but the
red frame will show when motion is detected.
