Securing the Appliance against Theft
While these parts may differ between devices, all looped security cables include a
bolt with knobs, as shown in the diagram below:
Figure 7: Looped Security Cable Bolt
The bolt has two states, Open and Closed, and is used to connect the looped
security cable to the appliance's security slot.
To install an anti-theft device on the NetDefend firewall
1. If your anti-theft device has a combination lock, set the desired code, as
that came with your device.
2.
escribed
in the documentation that came with your device.
. Slide the anti-theft device's bolt to the
Open
position.
described in the documentation
Connect the anti-theft device's loop to any sturdy mounting point, as d
3
Chapter 2: Installing and Setting up the NetDefend firewall
33