D-Link NetDefend DFL-CP310 User Manual Download Page 433

Page: 433 / 485

Backing Up the NetDefend firewall Configuration

•

Click

Browse

, and browse to the configur

n message appears.

5. Click

Settings

page displays the config

ontent and the result

ation file.

4. Click

Upload

A confirmatio

The NetDefend firewall settings are imported.

The

Import

of implementing each configuration command.

uration file's c

abl

Note:

If the appliance's IP add

your computer may be discon

ress changed as

nected from the

e to see the results.

a result of the configuration import,

network; therefore you may not be

Chapter 14: Maintenance

417

Summary of Contents for NetDefend DFL-CP310






































































































































































































































































































































































































































































































Search results

Summary of Contents for NetDefend DFL-CP310

Reviews:

D-Link NetDefend DFL-CP310, User Manual, Page: 433 / 485

Search results

Summary of Contents for NetDefend DFL-CP310

Reviews: